NGMC ADs

Submit classified ads for cars, trucks, parts, services, and ‘wanted’ ads, to:
Rick Ferrero

Call Rick at 404-209-9316 or email him at
NGMOPARADS
@GMAIL.COM
Please no calls after 9 p.m.

Ads are free to members, (Please include contact info for verification)
and will be run for two months unless renewed. Please update your ads as you sell your parts.

All advertisements submitted by e-mail must be in text…..
No attachments!

Many folks are asking "Why aren't the ad's posted on the 1st of the month anymore?"
In order to give our dues paying members first crack at the goodies offered in
our ads, they will now be posted after the newsletter has been mailed.
Membership Has It's Privileges :)

Due to complaints about internet spammers,we will print your email address on your ad,
but to save you from receiving hundreds of unsolicited emails, we will no longer
publish email addresses as active links on the site.

Ads

MOCARS

‘64 Dodge Dart GT, 360 .030 over motor, 4-barrel, 904 transmission w/reverse valve body (built
by Gerald Wright), B&M Shifter, Hedman Headers, Autometer Gauges with Tach, Customer
interior (new), Centerline Wheels w/BF Goodrich Tires, Black exterior w/Yellow stripe, Tinted
windows, Front Disk Brakes, Exhaust Cut-outs. Very reliable car and fast, 13.40 sec. 1/4 mile
on street tires. Please contact Steve Allred at 770-331-4300, $12,000. (01/08)

‘60 Plymouth Valiant, black, 4dr, /6, 3spd in floor, runs good, interior is a project. $1500. 770-
262-6533 ask for Rick. (01/08)

‘89 Chrysler 5th. Avenue (last year of M-body Rear Wheel Drive), Silver 4 door in good
condition. Everything works on this fully loaded car including R-134 converted A/C. This one
has 8 1/4 Rear Axle, and only year with an Air Bag. Good ride and has provided 20+ mpg on
the road, typically 18 around town. This car has been my daily driver for a year and half, and I
am selling due to replacing with another M-body Diplomat. $1,650 Call Chris at 706-353-1888
(Mon-Fri 8am-5pm) or 770-725-5502 evening from 6:30-9:30 pm. (01/08)

Going out of business, everything must go!!! ’53 Ply 4dr OD $5000 OBO, ’58 Dodge PU L6
$5000 OBO, ’56 Dodge Coronet 4 dr. V8 auto. No Rust! Decent paint and interior. Needs tires,
shocks and tinkering. $5000, ’66 Polara conv 383 AC, to build $2600 OBO, ’67 coronet 500 2
dr HT, ‘67 Coronet 440 2 dr HT, $1500 each ‘73 Sat Sebring, 400 B Block, runs real well, some
rust, to build $1500 ’54 Studebaker coupe, V8, some rust, to build $2000 ’69 Hot Rod boat 426
wedge Correct Craft, excellent condition low hours, good reconditioned trailer. $4000. ’66
Coronet 4 dr custom, excellent front clip $call for price. ’66 coronet 4 dr 440 very good front clip
$call for price. NOS flywheel, clutch assembly for early Diesel Dodge truck, will sell for ½ list.
Various A body fenders.’65 Dart grill, headlight bezel, hood nosing. Mike Z. 770-228-3629 6a.m.
-8p.m. (01/08)

‘66 Plymouth Valiant Signet Convertible, ( one of 2507 built ) All new slant 6 with Clifford Engr.
head, new 904 TF with 24-spline input and 4 pinion planetaries, 2.94 rear gear. Red exterior
with new red and white interior, new door weather seals, new red carpet and white top, 14”
small bolt pattern Cragars with BFG radials, Clifford header with new turbo mufflers and turn
downs, lots of fresh chrome, detailed trunk with new spare tire, correct jack, lug wrench etc.,
detailed interior and engine compartment. Build Card and de-code information from Chrysler
Historical, original Certicard , vintage 1966 license plate, owner’s manual, sales brochure,
Georgia title and registration and a reproduction window sticker and file folder of previous
owner and repair information ( needs a radio ). Just reluctant to put some after market stuff in
there !!!!..$15,000.   J.B.Zepko. 770-943-6903 Please, no calls after 8:00p.m.   (01/08)

‘70 Dodge Dart Swinger, rolling body, ‘72 340 motor, 4spd trans with bell housing, all needs
restored $5,000. Art Upchurch, 678 464 7341, art@shakleeinsurance.com. (01/08)
’69 Dart GT, /6, AT,PS, hit in R ¼ panel, spare panel included, not running. Rare, only 5600
total production, $1200. C.J. 770-287-7122 (01/08)

’72 Polara police car, 440HP, AT, PS, PDB, 8.75 rear, original black/silver North Carolina
highway patrol. Many spare parts including police radios/radar. Broadcast sheet, ready to
restore, not running, $2000. C.J. 770-287-7122   (01/08)

’41 Willys, new glass body on S-10 chassis. 4-link rear. Pedals, seats, gauges and other parts
included. This is a project. $5000. C.J. 770-287-7122 (01/08)

MOTRUCK

‘73 Dodge 150 pick up truck, long bed, fresh 440; stainless steel exhaust system; tool box; solid
rust-free body; rebuilt trans; good interior; good brakes; good tires; Edelbrock CVS carburetor,
Mopar Performance intake; headers; AC rebuilt; $1200. Gene Minicucci (770) 490 - 5215.
(02/08)

‘87 Dodge D-150 Pickup Short Bed. Last year of Slant 6, Automatic, Air Conditioning, Rear
Cargo Light, Power Steering, Power Brakes, Step Bumper, Good Tires. Clean and straight
outside and inside. Good gas mileage in excess of 20 mpg. Runs and drives good. Everything
works. $2,650 Call Chris at 706-353-1888 (Mon-Fri 8am-5pm) or 770-725-5502 evening from 6:
30-9:30 pm.   (01/08)

Pair of ‘78 Li’l Red Express trucks, Both need restored. Both were running when parked. One
has the rare red interior. $5,000. Art Upchurch, 678 464 7341, art@shakleeinsurance.com.
(01/08)

’68 Jeep Gladiator, 4x4 pickup, AT,AC,PS, very original, AMC 327 V8, good for resto. $2000, C.
J. 770-287-7122. (01/08)

MOPARTS

408 c.i. stroker small block street engine. Run like a 440 six pack without the weight or hassle.
1974 thick wall 360 +.030 with Eagle 4 inch cast stroker crank, MP rods with ARP bolts and KB
Hyper pistons, ported Edelbrock alum heads, 9.8 compression, Stainless Steel bushed 1.6
roller rockers and 231/237 duration @ .050 560/560 lift Comp hyd cam, Edelbrock RPM air gap
intake, Alum Fabricated valve covers, Braided steel fuel lines, Milodon 7 qt pan, 750 Holley.
Complete from carb to oil pan, water pump, fuel pump and proper flexplate, dist and wires.
Balanced & Blueprinted. 439 HP @ 5500 RPM and 482 LB FT Torque @ 4000 RPM at the
flywheel with no accessories. Will require 2500 stall and at least 2.94 gear and small notch in K
frame lip. Only run on test stand to break in cam and tune. Torque monster with great street
manners. Sould run Low Low 12’s or high 11’s in a decent A body with 3.23 gears and 8” slicks
$5950 firm. Gerald Wright 770-345-5281 (02/08)

‘78 360 .030 over pro street or bracket race engine. 11.5 to 1 MP forged pistons, Comp
260/260 duration @ .050 .555/.555 lift solid cam, comp timing set, MP cast crank, MP rods with
ARP bolts. Fully ported J style heads with 2.055/1.60 11/32 SS valves flows 261/175 CFM ,
chrome moly retainers and correct springs. MP valve covers, Harland Sharp Alum 1.5 roller
rockers. Holley strip dominator intake. 6 qt Kevko race pan fits standard K frame. Modified 800
Holley DP. 460 HP @ 6500 RPM and 442 LB FT Torque @ 5000 RPM at the flywheel with no
accessories. Will require 3000 stall or 4 speed and at least 3.55 gear. If street driven timing
should be limited to 30 degrees total unless race gas is used. Should run mid to low 11’s in
3000 lb A body with 3.91 gears and 10.5 slick Complete from carb to oil pan. Balanced &
Blueprinted. Complete from carb to oil pan, water pump and proper flexplate, dist and wires
$4500 firm. Gerald Wright 770-345-5281 (02/08)

410 cubic inch stroker short block. 1973 thick wall 360 +.040 with Eagle 4 inch cast stroker
crank, MP rods with ARP bolts and KB Hyper pistons internal balanced and blueprinted $2000
firm, 3.55 8 ¾ chunk 741 case, clutch style sure grip small yoke $500, 3.55 8 ¾ chunk 489 case
open rear end small yoke $250, Forged 440 crank just turned .010/.010 $250, 440 forged rods
and TRW forged pistons L2295 .030 $250, RB Aluminum Holley street dominator intake $100,
Non HP 440 engine complete with forged crank and matching 727 trans. Engine turns over
smoothly by hand. $600.00 for both, Free Trunk lid for 70-76 Dart and Valiant, All the glass
except windshield for 70-72 2dr HT Valiant or Dart, 4 speed alum bell housing for 455 Buick,
Olds, Pontiac or Cadillac, A body power steering box and pump, Late 70’s 318 truck engine 2
bbl needs rebuilt, 70’s 318 block with main caps never bored, Chrysler dual point dist
#2444853, cap, rotor, points. Gerald Wright 770-345-5281 (02/08)

‘77-‘78 Dodge truck grille $35; 1979 Dodge truck grille $35; Lil Red Express exhaust stacks,
nos, (inner pipes) $40. Gene Minicucci (770) 490 - 5215.

ADDCO SWAY BAR Performance Handling Parts for Sale all New in the Box. Urethane End
Link Bushing Sets. 2 Kits with 8 bushings each. Urethane Mid-Section Bushing Assembly Sets
complete with gold colored brackets. 2 Kits with 2 bushing and bracket assemblies each. 1 Kit
for 7/8" diameter bar and 1 Kit for 1 1/8" bar. Also have Rubber Bushings available for above
items included at no extra charge. Purchased for late "71 340 Duster but Well Suited for all
body styles with Heavy-Duty Front and Rear Bars. $70 OBO for everything. Call Pete 770-734-
0994 evenings and weekends until 10 PM or email to PLB30092@gmail.com (01/08)

Going out of business, everything must go!!! Too many parts to list, call with your needs or
make an appointment to come by. Mike Z. 770-228-3629 6am-8pm (01/08)

Distributor quick advance weight springs - # P2932675 $10, Sun visor- from 69 RR, green -
$40, Headlamp bucket #HI-5LT-886, #HI-5LT-887,HI-LO5-LT-889 - $10 for all three. Bob
Slaney
rjslaney@comcast.net or 770-354-6668. (01/08)

‘66/’67 DODGE CHARGER/CORONET parts: LH & RH Front Door Shells in good straight &
rust free condition $125 each (Wing Vent Assemblies removed & Tinted Door Glass both sides
sold separately if needed. Same door shell as Satellite/GTX), LH & RH Tinted Front Door Glass
and Quarter Window Glass w/regulators $75 each, LH & RH Rear & RH Front Wheel Lip
Moldings $35 each, Factory A/C Heater Box w/blower assembly $75, 3-speed Wiper Motor
w/harness $50, Taillight Bezel Surround in good condition $75, Power Steering Column (no
Wheel) $40, RH Rocker Panel Molding (3 inch wide stainless) $100, LH Rocker Molding (needs
some straightening) $50, Maroon Kick Panels $20 each, LH & RH Maroon Rear Bucket Seat
assemblies (top and bottom both) $100 pair, Metal Dash Frame w/Factory A/C venting $60,
various external stainless moldings see what you need (priced on condition), Front Bumper
Assembly $125, Coronet LH & RH Headlight Buckets $25 each side, Glove Box Door $35,
Charger Interior Panels (all 4) for trim parts $20 each, Big Back Sail Panels (plastic) $40 both,
Gas Filler Door $25. Contact Chris Mon-Fri 8-5pm 706-353-1888 or after 6:30pm-9:00pm 770-
725-5502. (01/08)

Parts from J.B…all parts are NOS unless noted otherwise …Nice used ’67 Coronet grille center
$50, Slant 6 904 trans stall converter ( 24 spline ) $50, ’76 to ’86 starter relay NOS 4111414
$20, Pinion seal #2931862 ( fits “489” case ) $20.00, ‘76-‘86 remote left side mirror # 3586840
fits both “F” and “M” bodies ( have 2 ) $50 ea., T/Q carb zip kit #3879778 NOS $25, Slant 6
Mopar plug wire set ( boxed ) $20, Small block original red boot plug cable set ( used ) $20, ”B”
body NOS fuse block #3588665 $40, ’65 – ‘66 Hood letters “P-L-Y-M-O-U-T-H” nice used $50,
’65 C body blower switch #2426910 (may fit others) $20, ‘76 –‘78 C body left side remote
mirror #3796586 NOS $50, Fuel filter ( all w/ECS ) #4049224 $15, Direct Connection voltage
regulators, single wire (used, have 2) # P3690732 .$20. Also have some other small parts,
some new, some used ..call for info. Please , no calls after 8.00 J.B Zepko 770- 943-6903 e-
mail jbandlp@bellsouth.net    (01/08)

Parts from J.B. WHEELS … 2 SETS Set 1…1979 Aspen R/T forged aluminum wheels Part #
3880931 cast date 9-78 ( very rare ) 2 tone steel gray , 14”by 6” , with 4” offset, and large bolt
pattern ,New stainless centers with tri-bar knock-offs and Mopar decals in center ..new correct
½ x 20 ) coned lug nuts (right hand threads ) , with correct lug wrench .Steal ‘em for $400. (
Valid offer ??) Set 2…4 each stamped steel wheels,14’ by 5” with 4 “ offset ( fits all with large
bolt pattern, drums or disc ) Dated 3-67 and stamped “KelseyCanada”, along with a complete
set of 4 pristine 1967 Coronet deluxe wheel covers and 20 NEW ½ “ by 20 right hand lug nuts
. Sold as a set only !!! $400. ( valid offer ??? ) One ( 1 ) New 7:75 x 14 Nylon tubeless bias ply
DUNLOP ELITE tire w/double white stripe $ 75. One ( 1 ) NOS 3671862 slant 6 cast iron
exhaust manifold dtd 5-79 ( U.S mfg , not cheap Brazilian casting ) $ 75. One (1) used
windshield washer tank assy ( Includes tank and pump ) # 3799689, fits ’67 and ’68 “C” body
(Chrys /Plym./ Dodge ) not Imperial , slightly yellowed , but very serviceable $50. Pricing does
not include shipping J.B. Zepko 770-943-6903 Please, no calls after 8 PM (02/08)

Complete drivetrain from ’70 Duster: 198 /6, trans, SBP rear end, driveshaft, radiator,
alternator, other assorted parts. Ran when pulled. Best offer takes it all! Ralph 770-898-5964
(01/08)

’67-’71 truck tail light lenses, $25/pr., ’66-’67 wiper motors $20 ea., many steering column parts,
call, ’68-70 B-Body console carpet set, used, blue, $20, ’68 Dart GT decklid & finish panel
$175, ’73-’74 Charger doors $100/pr., fact. aux trans cooler from ’74 truck $20, ‘73-’74 B-Body
440 oil pan $80, ’67 C-Body dash pad, nice $50, ’66 Belvedere grill, frame, latch & RH bezel
$50, ’68 440HP disassembled core $1000. ’70 383HP cast date 10-14-69, assy date 11-4 .030
forged pistons, new cam, rings, bearings, windage tray, 402 oil pan, 906 heads w/hardened
seats, $1500, New Process 205 xfer case from ’74 Power Wagon $300, plastic racing seat on
tracks $35, pair 340 ‘Cuda rear springs $40, ’70 Coronet front valance, rough, $50, ’70 Coronet
RH fender $100, 8 new MP .060 440 pistons 9:1 CR $200, ’69 Charger left fender $100, ’71
440 core $1000, MP P4876413 porting templates 318/360 Magnum $10, New ’66-’70 B-body
727 trans cooler line set $80, used 440 Six-Pac con rods, have 14 + balancer $200. C.J. 770-
287-7122 (01/08)

’66 Hemi relay bracket $40, ’68 A-Body ash tray assy $40, Mopar Holley carbs #3667, 4366,
4440 $40/ea., ’67 Dart hood latch & brkt $20, ’70 Coronet hood latch & brkt $20, ’68-’69 B-Body
buddy seat & brkts $50, radiator #3443947 ’71 440 C-Body $30, ’67 Newport instrument cluster
& bezel $25, ’67 Newport dash pad, perfect $50, ’71 ‘Cuda SB rad. $100, ’68 Dart GT fenders
w/trim $50 ea., misc. A&B suspension parts, call, ’62-’65 B-body clutch linkage $100, ’64 Dodge
B-body deck lid $100, misc. non-HP exh. manifolds, call, ’68-’69 Charger & ’70-’71 E front tag
bracket $50, ’71 Monaco front valence w/ turn signal $50, ’68-’70 B vacuum trunk opener parts
$100, ’68-’69 Charger front bumper guards, long & short, $50/pr., AFB carb #8636S large neck
$50, AVS carbs: #4968S ’71 440HP AT $100, #4425S ’68 340 AT $100, #6125S ‘71 383 AT
$100, #4734S ’70 383 AT $100, #4640SA ’69 440HP AT $100, #4966S ’71 440 AT $100,
#4682S ’69 383HP AT (have two) $100, 8ea. 12:1 .030 Hemi pistons, used, $150. C.J. 770-
287-7122 (01/08)

’70 Plym. Service manual $75, New TRW .030 forged 440 pistons $225, New MP .030 360
pistons w/MP rings $225, New .060 318 cast pistons $150, used 426 HEMI con-rods, have 6
$500, 383-440 truck/van headers $100, Moroso red anodized valve covers for BB $60, earlt LA
valve covers $25, M/T 340 valve covers $60, B-body ’68-’69 factory Hurst console shifter $150.
RR/Coyote collection, many pieces, new & vintage $150, rear seat for ’70 B-Body $25,
Edelbrock DP4B dual plane intake for 383 $125, 2-15x10 LBP steel racing wheels, new $110, ’
70 A-Body front unibody clip from trans x-member to rad support, A/C firewall & inner fenders all
good $125, ’73-’76 Valiant driver’s door, nice $50, ’68-’72 Dart/Val driver’s door w/glass &
mirror $100, ’67-’69 Dart deck lid $30, pair BB engine mount brkts ’66-’72 $25, ’65-’70 B-Body
8.75 axle $150, 18-spline B-Body 4spd, pre-’70 $700, ’68 truck 383 w/mounts, manifolds,
clutch housing & rad $600, ’70 B-Body V8 K-frame $75. C.J. 770-287-7122 (01/08)

Door Glass: Driver’s & passenger’s side door windows from ’77 D-150, $40 ea., driver’s side
from ’79 D-150 $40. $100 for all three. Rick 404-209-9316 (01/08)

MOWANTED

Wanted: To buy a good used set off gears for a Dodge 8 3/4 rearend w/ 489 case. Looking for
anything between 3.91 - 4.89. Thanks Craig Harding   404-408-4978 (02/08)

Wanted: Someone to finish up my Demon, I have no place to work on it. I can transport if
necessary. Needs: Brakes bled, one line connected, install elec. fuel pump, regulator & fuel
lines, install new alum. radiator & hoses (have parts), install alternator & belt, mount trans
cooler & run new trans lines. Roger 404-358-0195 or TCELLGURU@aol.com (01/08)

Wanted: Factory 10.5” flywheel for ’71-’80 360, BB clutch housing 10.5” or 11” casting #
2892626 or 2892513 or 2892262, 4.80 pilot hole. C.J. 770-287-7122 (01/08)

Wanted: for ‘66 Valiant working original style AM radio, 22 -24” original style radiator preferably
with shroud and for automatic trans application, 7 blade non thermostatic fan ….Been looking
for this stuff for a while. Come on, guys, someone out there has this stuff just collecting dust. J.
B.Zepko. 770-943-6903 Please, no calls after 8:00p.m.    (01/08)

MOSTUFF

Bonanza mini-bike, 5HP Briggs & Stratton. Runs, but needs carb work, great pit bike $125. 10”
South Bend lathe, 220-3 with single phase converter, many accessories included, $2200. C.J.
770-287-7122 (01/08)

February 2008
All advertisements submitted by e-mail must be in text…..no attachments