Classified Ads

Submit classified ads for cars, trucks, parts, services, and ‘wanted’ ads, to: Rick Ferrero
Call Rick at 404-209-9316 or email him at: NGMOPARADS@GMAIL.COM

Please no calls after 9 p.m.
Ads are free to members, (Please include contact info for verification)
and will be run for two months unless renewed. Please update your ads as you sell your parts.

All advertisements submitted by e-mail must be in text . . . No attachments!

February 2012 Ads

’74 Swinger, disassembled for body work, /6 AT, 7k on engine & trans, new parchment bucket interior, five 14x5 Rallyes, front end rebuilt with Poly bushings, all major mechanical work done, just needs cosmetic finishing.  New floors, quarters, trunk extensions, A/C firewall. Many extra parts included. $2500 OBO.  Larry 770-369-3102  (02/12)

’51 DeSoto 4-door, complete car, unrestored. Good solid body, wide whites, manuals & other odds & ends. $1300. Jimmy 404-217-2213  (02/12)

‘87 Shelby Lancer, Number 16 of 800 made. Car is red with grey cloth interior, A/C, PS, 4 wheel power disc brakes. Original 2.2 turbo II intercooled engine with 5 speed Getrag gearbox. Car has 161,000 miles. I rebuilt the engine and trans at 121,000 miles. 30 MPG hwy 24 in town. Car comes with the original owner’s manual signed by Carrol Shelby (original California car). Included is a full set of factory service manuals and all of the Shelby literature, original radio, MP computer (not installed), spare turbo and a complete disassembled 2.5 engine. Runs and drives great but needs the following. Paint is faded, A/C needs repair, left drive axle needs to be replaced. $2500 Gerald Wright 770-345-5281  (01/12)

‘63 Dodge with 472 Hemi.  This car is the real deal chosen by Celebrity Judge Mike Buckel as Best of Show at 2008 Carlisle and selected by another Celebrity Judge at Carlisle in 2011.  The quality of finish is outstanding. Asking $69,995.  Contact Steve Chervinsky near Montreal at 514-247-4847 or 63hemipolara@gmail.com (01/12)

 

241 Red Ram Hemi, all major work done, heads done, hardened valve seats, new (Chevy) water pump, have all parts, needs assembly, many upgrades to make it an easy swap, call for details $1000. Open 8.75 E-Body rear end, complete, drum-to-drum, 340 4bbl intake with rebuildable T-Quad. Larry 770-369-3102  (02/12)

Only $496 for 4 -1970s Challenger style steel road wheels & trim rings with Goodyear Wide Oval G70 14 white side wall bias-ply tires that have full tread. Tires are over 10 years old and are sold for display only because of their age. I have driven on them but told they are too old to be safe for highway driving. Jim 404-966-0698 (02/12)

Full Race Cam: Motion Roller cam for big inch big block. 288/300 @0.05, ,804/,767 lift, 109.5 LSA.  Has 20 passes with 800# springs.  $390 new, make offer.  Bill Stevens  avenger07@comcast.net  cell 240-422-1905 (01/12)

NEW W5 59 CC heads (P5249002 last generation) still in the box. With new offset shafts, new complete Norris stainless roller rockers, new stands, new long stainless valves 2.08/1.60. New Isky roller cam springs.  Heads come with 4 intake manifolds. 1 new MP tunnel ram intake for 2 4bbl, 1 MP Dominator flange single plane race single 4 bbl, 1 MP street strip 4150 flange single 4 bbl, and 1 MP street dual plane. 1 used 262/262 620/620 billet roller cam for A engine. Used TTI A Body headers. Complete setup $4500 firm will not separate. Gerald Wright 770-345-5281 (01/12)

New T&D shaft mount rocker system for SB LA heads. This is the ultimate system for the regular heads and could  be installed on the Edelbrock Alum heads as well. It requires the rocker stands be machined down. That can be done by any competent machine shop. These sell new for $1000+. Only $600.  Gerald Wright 770-345-5281 (01/12)

New Swirl Port MP P4529269 SB LA Heads still in the box. Cut for 2.02 /1.60 valves. New stainless valves are included. $800.00 Heads and rockers from above  $1300 as a package Gerald Wright 770-345-5281 (01/12)

New R3 48 degree  4 bolt main tall deck non Siamese block (P5249450) still in crate, new ported 48 degree iron W2 Heads (P5007445AB),  New 4340 forged 4 inch stroker crank and 6.123 H beam 4340 rods. Like new Victor W2 intake and uncoated TTI W2 A body headers. Will not separate $4800. Gerald Wright 770-345-5281 (01/12)

394 Stroker Small Block Bracket/Radical Street engine. Engine was freshened in May 2010.  +.030 340 with a MP 3.79 forged stroker crank to get 394 cid. Eagle 6.123 H beam rods and Venolia flat top pistons. SFI Fluid Damper and SFI flex plate. Compression is 11.2. Heads are midly ported W5’s that flow 308 @ .650 lift. Cam is a solid roller 270/276 @ .050 .660 lift with Erson 1.6 needle bearing roller rockers. MP W5 single plane intake and 800 DP Holley modified with many Proform parts. MP race dist. 540 RWHP on pump gas. $5500. Gerald Wright 770-345-5281 (01/12)

Parts from J B …all  parts are NOS unless noted otherwise. Nice used ’67 Coronet 500 grille center $50,   ‘76 to ‘86 starter relay NOS 4111414 $20. Pinion seal #2931862 (fits 489case) $20. ’76-’86 remote left side mirror NOS fits F and M bodies  (have 2) $50 each.  ’65 C body blower switch # 2426910  (may fit others) $20.  ‘76-‘78 C body left side remote mirror #3796586 NOS $50, fuel filter  all with ECS) #4049224  $20.  Direct Connection electronic voltage regulators (used, have 2) #P3690732 $20 each. Call for info, all parts are less shipping. J.B. Zepko Please, No calls after 8PM or Sunday   770 943-6903. (01/12)

Parts from J.B. WHEELS  ‘79 Aspen  R/T forged aluminum wheels Part # 3880931 cast date 9-78 (very rare)  2 tone steel gray, 14x6”, with 4” offset, and large bolt pattern, New stainless centers with tri-bar knock-offs and Mopar decals in center, new correct  (½ x 20) coned lug nuts (right hand threads) , with correct lug wrench. Steal ‘em for $400.  (Valid offer ??) One (1) New  7:75 x 14 Nylon tubeless bias ply DUNLOP ELITE  tire w/double white stripe  $ 75.  One (1) used windshield washer tank assy (Includes tank and pump) # 3799689, fits ’67 and ’68  “C” body (Chrys /Plym/ Dodge) not Imperial, slightly yellowed , but very serviceable  $50. Pricing does not include shipping.  J.B. Zepko. 770-943-6903  Please, no calls after 8 PM or Sunday.  (01/12)

FREE FOR PICKUP @ J.B.RESIDENCE Bed liner for Dakota pick-up, Don’t know the year coverage, but was installed in my Dakota Shelby at delivery. Now, just restoring the truck, Hagerty insists that to be insured that nothing is to be in the bed, (plus the fact that I’ve just spent $$$$ to have the truck painted), so I’m ready to part with the liner (my truck is an’89, so if you know what bed (and for how long they were produced) here’s a chance for a freebie. I also have the header seal for 1963-1966 Valiant /Dart convertible (it’s a new part from Metro molded parts)  Also free , just come by and pick it up (it’s in the original box). J.B. Zepko 770-943-6903  Please, no calls after 8 PM or Sunday.  (01/12)

 

Wanted: Original drivetrain from my Fury. I bought a black 70 SPORT FURY GT 440-6  from POTEETS wrecking in ROME ,GEORGIA. The car had been there since the late 70s early 80s...old man Poteet could not remember who bought the drivetrain..so anyone in that area ever hear of the engine and trans being around ? BIG EDDIE SCOTT gave me the original fender tag he got off the car.. but didn’t know of the engine. Car was sold used in Rome at LEWIS MOTOR COMPANY...wrecked in RF  sometime after that sure would appreciate any info!  Dan  253-852-6618  or ph23vo@juno.com (02/12)

Wanted: 4-speed trans & flywheel for ’70 Roadrunner 383. Mike 706-491-3884  (02/12)

Wanted: 225 Slant 6, in good running condition. Call James McDonald @ 770-733-9752 (01/12)

 

Professional cylinder head porting complete with before and after flow bench sheets.
Stage I $250.00 for bowl porting and gasket match. Stage II $400 port runners and shape guides + Stage I
Stage III $600 polish everything and work chambers + Stage I & II. $50 to flow your Chrysler head.

Professional Engine Building 4 cyl to hemi - restoration to all out race. You can see and hear your tuned and broken in engine run before you take it home and drop it in and turn the key. Crate engines are one size fits all. Computer model your engine before you spend a dime. Want to run high 11’s on pump gas w/ 3.23 gears in an A body? A custom built 408 SB will do the job. High 10’s are in reach for your A body with a pump gas 512 BB and 3.23’s. Call for custom quote.

Torqueflite rebuilds from stock to all out drag race. Pushbuttons to 518 od’s starting at $450 for stock 904 if you pull it. Gerald Wright 770-345-5281 (01/12)

MOPAR MECHANIC. 15 years Chrysler and ASE Certified Mechanic, repair Muscle Cars as well as ALL Chrysler, Dodge and Jeep Products.   Paul Chambers, 678-789-6749 (02/12)

Do you offer a service that would be valuable to your fellow members?
Post it here!

POSITION WANTED: Executive Assistant, Marketing, Senior Level Support. 20+ years experience in delivering superior administrative support, attention to detail! Linda Fraschilla, 678-778-4652                 lindafras@mindspring.com (05/11)

 

We have our black satin coaches style jacket, with a quilted lining, beautifully embroidered with the club logo on the left chest and the club name with an array of 7 “Classic Mopars” on the Back. You can add your name to the right chest. The cost is only $80 (add $5.00 for 2XL)
Also Available: Club Polos, Caps and Name Badges.  All items are available on our website using PayPal or contact Rick or Chris.

 

A service by the NGMC
Post your skills and positions wanted, but please keep it brief
(no 10 page Resumes please)

******************
REMEMBER: ADS ARE FREE TO ALL MEMBERS!
*************************